Billboard

Revolution 52 Alum Flat 48′ Wide Spread Air 

Length / Width: 48 feet x 102 inches

Suspension Type: Wide spread air
Frame Rating: 80,000 lbs distributed – 52,000 lbs concentrated in 4 feet- GAWR and tire ratings determine legal payloads
Flooring: Knurled extruded 3-1/8 aluminum, multi-hollow friction stir welded floor with NO wood nailer strips; Heavy wall extrusions in single coil area; Heavy wall extrusion at rear
Side Rails: Exclusive Revolution Technology – one piece routed aluminum designed

for strength and impact

Stationary Chain Cargo Tie Downs: *Not included
Stake Pockets: Routed Aluminum on 24 inch centers (2 load securement openings in between stake pockets)
Rubrail: Integrated with side rail
Main Beams: Extruded aluminum – 8.25 inch flange
Kingpin: 30 inches
Loaded Fifth Wheel Height: 49 inches
Landing Gear: Jost AX100G19 ALUMILIGHT with forward & rear bracing
Bulkheads: None standard
Number of Axles: 2
Axle Spindle: Tapered
Brakes: Spring brakes, auto slacks; Aluminum air tank
Air Line Filters: (2) Meritor In-line type installed
ABS: 4S/2M – no cable or tool
Axle Spread: 122 inches – set at rear
Hub and Drums: 10-hole hub-piloted ADI with outboard fused drums
Wheel Ends: Grease in hubs – *** 5-year wheel end warranty ***
Wheels: (4) 22.5 x 14.00 aluminum LvL One buffed Super Single wheels
Tires: (4) 445/50R 22.5 20 PR Michelin Multi Energy T Super Single
Tire Inflation System: None standard
Suspension Detail: Hendrickson AANT23K Intraax air ride
Auto Glad Hand Dump: Installed
Electric Dump Valve: Wired to 7-way auxiliary socket to dump rear axle
Front Corners: Tapered
Electrical System: Exclusive Revolution Technology: LED: 5 lights/side, 3 rear recessed light bars, with 10 Year Comprehensive Electrical System Warranty
Other Electrical Specifications: 4 way socket on rear with one hot/one ground pin

for wide load and strobe light connections

Paint: Black urethane on steel parts with Revolution decals – STANDARD
Conspicuity Tape: Per NHTSA specs – installed in recess on rubrails
Bumper: Meets U.S. underride requirements
Mudflaps: 1 set OEM standard
Spare Tire Carrier: None standard
Winch Track: Dual full-length integrated aluminum – double L design
Sliding Winches: 12 standard; 6 each side; sliding rope hook/ winch strap hook retainers – STANDARD
Winch Straps: None standard
Dock Bumpers: 1 pair rubber on rear
Hubodometer: None standard
Registration Holder: (1) OEM standard installed
Tool Box: None standard
VIN Plate: Bilingual US/Canadian VIN plate